Cart  |  Contact  |  čeština
Czech 596 311 899
International+420 596311899

Ball Bearing Gas Turbine Flow meters with Male NPT Fittings


Gas Turbine meters | FTB-930

Gas Turbine meters

1 year warranty
  • Gas turbine meter with ±1% of Reading Accuracy
  • Ball Bearing Design for Economy
  • 440C Bearing Retainers for Durability
  • Ball Bearings Field Replaceable Without Loss of Calibration
  • Deflector Cones Stabilize Low Mass Rotor for Increased Bearing Life
  • NIST Certificate Supplied Standard
Průtokoměry s mechanickým snímáním (vrtulkové atd.) - View related products


Click on this link if you need more information about a Flow meter.

The OMEGA™ turbine gas meter of the FTB-930 & FTB-940 have male NPT end fittings for easy connections. They are suitable for use with gases with a minimum density of 0.025 lb/ft 3 (air at STP is 0.0752 lb/ft 3 ).These units come supplied with a mating 2-wire connector and can be supplied with integrally mounted FLSC-60 Series signal conditioners to provide 4-20 mA, 0-5 V, or amplified pulse outputs. These turbine gas meters are intended for clean service only; where there is any doubt about the fluid, strainers are recommended.

OMEGA™ precision turbine gas flowmeters are designed to measure actual cubic feet or actual volume passing through the meter. Before sizing a flowmeter, it is necessary to convert flow units (i.e., SCFM, LPM, etc.) to actual units. To convert to actual measured volume (ACFM) from standard volume (SCFM), use the following formula:
ACFM = SCFM x 14.7/Pa x Ta/530
ACFM = Actual cubic feet per minute of measured gas flow
SCFM = Standard cubic feet per minute gas flow
Pa = Operating pressure (psia) in = (psig + 14.7)
Ta = Temperature in degrees, Rankine = (°F + 460)

Accuracy: ±1.0% of reading
Repeatability: ±0.25%
Materials of Construction:
Body: 304/316 stainless steel
Rotor: 17-4 PH SS
Bearings: 440C stainless steel
Output: 30 mV p-p sinewave min.
Place Order(Specify Model Number)
Part Number/ Desc.
Quick Ship
Consult Sales  
75-1200 Max Linear Range (ACFM); 4 End Connections MNPT (in)
Quick Ship
Consult Sales  
24V 0.75A regulated dc Power supply. 90-260 Vac 1.8 m lead with stripped ends. With International plugs
Quick Ship
Availability: 2 weeks
6 digit, 1/8 DIN panel meter for Rate or Total, 85 to 260 Vac powered, with dual relay outputs
All dollar amounts on this site are shown in Euro currency. Note: Comes complete with operator’s manual and NIST Certificate for air.

To order turbine gas meters with integral signal conditioners, specify model as a system such as : SYS/FTB-932/FLSC-62A. Omega will scale the signal conditioner with the appropriate calibration information from the turbine meter specified.

No other calibrations are available.

Compatible Meters: DPF701, DPF402, DPF70 with FLSC-AMP, DPF10, DPF500, FC20, 21, 22

Contact Flow Engineering Dept

Ordering Example:  (1) DPF702 1/8 DIN Panel Meter for Rate or Total, €310.00

Product Manuals:

Download FTB-900/FTB9500 Series - Precision Turbine Flowmeters
Download FLSC-64 - Pulse Amplifier
Download FLSC-62A - Signal Conditioner
Download FLSC-61 - 3-Wire Analog Transmitter
We noticed you are from the US. Visit your local site for regional offers and live support.